Mark work pieces as usual with ticks and crosses. With Dowelmax
in normal configuration align at front edge of shelf. Drill hole.
Insert distance gauge and drill second hole. Remove clamp and
reference brackets from guide body of Dowelmax
Locate centre or position required on end panel. Draw dotted
line. Move down ½ inch and draw solid line.
Clamp piece of 1" x 1" to panel to align with solid line. Clamp
centre guide body to 1" x 1" and align to tick mark. Drill one
hole.
Insert distance gauge. Clamp guide body to 1" x 1" and drill
second hole (or additional holes as required).